Mac-Eight BOARD TO BOARD CONNECOTR (SMT)

BOARD TO BOARD CONNECTOR (SMT)

Board To Board Connector [HQ Series] (10pcs/pack)	PAT

Dimension plan

Recommended pat layout

Use as male pin for SMT board, Aluminum board, Iron board, Ceramics bord, etc which can not use through hole.
Also usable as wire of hybrid IC.

Material	Pin part	Copper Brass (for the placement pin)
Material	Resin part	PCT black (UL94V-0)
Finsh	Au plating over Ni
Rated current	HQ-2 series	3A
	HQ-3 series	4A
	HQ-4 series	5A
Insulation resistance	500M ohm or more
Dielectric strength	1000V AC, DC 1min
Temperature range (degrees Celsius)	-40 to +125

Model no.	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	F (mm)	P (mm)
HQ-2-5	0.6	5	1.0	1.6	2.0	0.635	2.54
HQ-2-8	0.6	8	1.0	1.6	2.0	0.635	2.54
HQ-2-10	0.6	10	1.0	1.6	2.0	0.635	2.54
HQ-3-5	0.8	5	1.2	1.8	2.0	1.27	2.54
HQ-3-8	0.8	8	1.2	1.8	2.0	1.27	2.54
HQ-3-10	0.8	10	1.2	1.8	2.0	1.27	2.54
HQ-3-15	0.8	15	1.2	1.8	2.0	1.27	2.54
HQ-4-5	1.0	5	1.4	1.8	2.0	1.27	2.54
HQ-4-8	1.0	8	1.4	1.8	2.0	1.27	2.54
HQ-4-10	1.0	10	1.4	1.8	2.0	1.27	2.54
HQ-4-15	1.0	15	1.4	1.8	2.0	1.27	2.54

*Notice
When long connected type is used, it may happen to bend on reflow.
Use of glue to prevent from bending is recommendable.

HOW TO ORDER
HQ-2-5-10P
Put # of pins if necessary. (max 20 pins)